10 Best Ceramic Coating for Motorcycles [Ultimate Guide]
If your a classic bike owner, a chopper fan or a sports bike speedster having your bike looking as good as it can be is vitally important.
With the suns UV rays, acid rain, annoying bird droppings, tree sap and the open road debris all ready to eat into your bike paint work it can be difficult to keep it in top condition all the time.
A good ceramic coating is the best option to fend off these shine busting elements and here we will take you through your ten best ceramic coating product options
Whilst many car owners seek out the services of a professional detailer or a ceramic coating service agent due to the large area to be perfectly applied, motorcycle owners can easily apply a coating due to the smaller areas.
Lets first take a look at the preparation and then application process for best results, followed by the best ceramic coatings for motorcycles for the best protection.
Surface Preparation
To enable the ceramic coating to completely adhere to the paint clear coat surface it has to be prepared properly. This is one of the most important points of applying a pro ceramic coating and its long-term protection.
Here is the process
- Wash the bike with a good quality soap, removing all surface contaminants is the first and vital step as without this it is doubtful the final result will be good. A good pH neutral shampoo should be used with a good amount of washing. This will be suitable for both the metal and plastic parts of the bike, as we have to take this into consideration with bikes more than cars.
- Once cleaned you should use a clay bar to remove any road contamination and insect contaminants of which motorbikes are very prone to as I'm sure you know! This is a simple process using a clay bar with plenty of lubricant. Work the clay bar in small circles, pressing firmly onto the surface. The clay will pick up every grain of grime from the vehicle's paint. Two simple tests can be made to justify if your motorcycle's paint needs clay bar prep work. Firstly, simply run your finger tips over the surface, if they do not glide effortlessly across the surface then its highly likely a clay bar is needed. Secondly. lightly drag a microfiber cloth over the surface, if the cloth gets snagged on ingrained imperfections then its a sure sign your paint protection film needs clay barring.
- Polish the paint. This is also known as "paint correction". It is the process of removing any swirl marks, minor scratches, rock chips or ingrained brake dust on the paints clear coat. Think about it, ceramic coating is a hard protective layer on top of your paint. It is clear as a bell. Therefore, it wont hide any paint defects such as fine scratches or light scratches , it merely adds a new layer of protection. So it is essential that the clear coat on top of your motorcycle's paint but below the bike ceramic coating is perfect. This is a very important preparation step.
- Finally, wipe the whole of the surface with a surface cleaner or panel wipe to ensure ALL oil's or residues are removed prior to applying and of the different types of ceramic coatings.
The Ceramic Coatings
Following the completion of surface preparation you are then ready to apply the coating as per the ceramic coating manufacturers guide lines. Of which, from my personal experience are similar but with slight differences.
Lets take a look at our ten best ceramic coatings for motorcycles.
Car Pro C Quartz Kit
I featured this first as it is generally know as one of the easiest ceramic coating forms to apply. This is combined with a great reputation for long durability on all exterior surfaces.
This nano-ceramic coating kits comes complete with everything from coating to applicator pad and all you need to apply to coating to a mirror-like finish. It provides a tougher shell as any other coating and results in super hydrophobic qualities or water beading. Not that matter as much on a motorcycle as it does on a car's paint because of the limited amount of surface along with the lack of flat, level surface.
The kit comes with clear and detailed instructions on application and proper maintenance. Making this a super all round product and an easy to use introduction in ceramic coatings.
Mothers CMX Ceramic Coating Spray
In this blog post I aim to cover all options for motorcycle's and this ceramic spray coating has to be featured.
From the world renowned Mothers Detailing Brand you can guarantee this is a quality product. This comes in an even easier form to apply as it is a spray on application and is a good choice if you or your team members are short on time! Spraying on the coating can really save some time. I would also like to add that this method is particularly useful for motorcycles as the spray can really help you get those difficult to get to areas. This coating does require 24 hours cure time to get a strong bond, particularly on a metal surface, something you may want to consider if the bike is in daily use!
Its another well renowned long-lasting protection product which can really benefit in the long run.
Please note this coating does not come in a kit form, it is jus the coating in a spray bottle.
Migliore Vista Coating
We have included this on our list for its designed to use on glass, of which there can be a good amount on a bike. I'm thinking here is the windshields and lights on your bike. As this super ceramic product is specifically designed for its best use on glass and for this purpose there can be no better choice.
Vista is particularly good in protecting against bird droppings, UV light and really is the easiest way to have your glass work protected.
If one of the ceramic coatings suited to metallic car care are used on glass, I really don't think you will have as good a finish as if you used Migliore Vista Ceramic coating.
Ethos Resist Hybrid Coating
This spray and wipe formula ceramic coating is a super option for full coatings on motorcycles.
It is a Hybrid Graphene coating that that provides effortless application. The real advantage here is that it is suitable for application on UPVC as well as painted metal surfaces, which makes this a good product for the sports bike enthusiast.
This ceramic enthused spray cannot be any easier to apply. The simple spray and wipe method ensures it is easy to apply to all surfaces. Then after the only maintenance needed is regular washing. One thing to note is that this product can sometimes leave a trace or two of chemical residue if it is not buffed in time, but thi9s is common with many products.
Boosted Ceramics 9H Nano Ceramic Coating Kit
Here we have one super nano ceramic coating kit that will give you superb results that some ceramic coating companies can only dream about!
At the molecular level this liquid polymer Nano09 ceramic coating kit dispels the ceramic coating myths and gives a real easy application.
Following the above suggested preparation routine is essential with this kit to create a permanent bond.
Everything to apply the coating is provided in the kit so you have no worries once the kit is delivered you are ready to start on the prepared motorcycle surface. Applicator pad, microfiber applicator pads and a microfiber buffing towel are all provided.
A stunning shine and super hydrophobic protection is assured, no matter what the environmental elements throw at it!
HydroSilex Marine Ceramic Spray Coating
This is an unusual addition to the list as it is designed for boats and other marine uses. However, we think it is ideal for the chopper, hog type bikes that are not so well shielded from the environmental factors.
It makes post coating maintenance really easy and creates super hard surfaces that are able to be easily washed off in a parking lot to regain that much gloss look your bike deserves even in direct sunlight!
The hydrophobic formula is the primary ingredient that makes the whole lot of aftercare really easy. It is definitely worth a try if you are looking for something a bit different, maybe a second coating product.
Shine Armor Ceramic Coating
Shine Armor Ceramic Coating is a popular car protection product that is designed to provide long-lasting and durable protection to your Motorcycles paintwork.
The coating is made from a unique blend of ceramic particles that bond to the surface of the car, creating a hydrophobic barrier that repels water, dirt, and other environmental contaminants.
One of the standout features of Shine Armor Ceramic Coating is again its ease of application.
The product can be applied quickly and easily using the included applicator pad, and it dries quickly to provide a smooth and glossy finish.
The coating is also self-levelling, which means that it will fill in any imperfections on the surface of the motorcycle to provide a smooth and even finish. This is particularly important on the many curved surfaces of a bike.
Meguiar's Hybrid Ceramic Wax
Meguiar's Hybrid Ceramic Wax is a very popular product from a renowned brand. Whilst it promotes its self as "Hybrid" Ceramic Wax it still has the performance of some of the products promoted as just a "Ceramic Coating"
I really do like the Meguiars brand and products an I think this could be a nice halfway or first try ceramic for motorcycle owners who are not that sure if it would work on their bike.
It is an effective car wax that uses advanced SiO2 hybrid technology to provide a durable and long-lasting protective coating for your vehicle's paintwork.
It is a spray-on wax that can be applied easily and quickly, making it an ideal choice for those who want to protect their car's finish without spending too much time or effort.
The finish that Meguiar's Hybrid Ceramic Wax provides is very glossy and deep, enhancing the color and shine of your car's paintwork.
It also provides excellent protection against environmental factors, such as UV rays and acid rain, that can damage the paintwork over time.
Hydro Slick Ceramic Coating
This unique coating reflects light in a super deep glossy way that really suits the curves of a motorcycle.
It is unique in that its Si02 hybrid technology claims to actually seal the pores of the surface it is applied to.
Additionally this enable it to attach well to any surface and again plays well to the application on curved surfaces. So, I think this could really give great results on the surface of a motorcycle and really could be the best way ceramic coat a motorcycle
I also respect the Chemical Guys brand as from my experience all their products give me great results.
Nexgen Ceramic Coating
Nexgen Ceramic Coating is a popular product for long-lasting protection and high-gloss shine.
It has several unique features that set this product apart and one in particular that makes it particularly interesting as to why it could be ideal to use on a motorcycle.
This feature of Nexgen Ceramic Coating is its 9 H hardness rating. This rating indicates the coating's resistance to scratches and other types of surface damage.
What we have to consider when ceramic coating a motorcycle is the greater risk of scratches being caused by the rider mounting and dismounting with many metallic parts such as zips, buttons and steel boot tips all being in relative close proximity at all times.
With this products extra hardness I think it could prove ideal for the result we are seeking here.
This high class coating is also highly resistant to chemicals, making it ideal for protecting against harsh environmental elements and pollutants for a long time.
Ceramic Coating For Motorcycles Conclusion
I hope you now have some ideas on which could be the best ceramic coating for your motorcycle.
I have tried to uncover unique features of the various ceramic coatings available to enable you to get the best results on your bike.
Please take into account what type of bike you are coating, being its mostly plastic or metal.
Any of the above ceramic coatings will give good results and I hope with my insights and research they will help you make a good choice of ceramic coating for your bike.